Quality Management
Three inspection gates, documented at every stage — from incoming timber to the loaded container.
Three inspection gates
Every order passes three documented checkpoints. Each gate produces a record that ships with your documents, so you can trace what was checked and when.
- IQC — incoming material. Timber moisture and grade, aluminium wall thickness, leather thickness and colour fastness, spring wire diameter and rate.
- IPQC — in process. Frame squareness, weld quality, carriage travel, spring bracket alignment, upholstery fit and stitching.
- FQA — final inspection. Full assembly check, load test, spring tension test, hardware torque, then packing and carton drop test.
What we test on every reformer
Carriage travel
Full-length run on both rails; measured for binding, noise and end-stop alignment.
Spring tension
Each spring checked against its rated resistance; five-spring sets are matched so the stack is balanced.
Frame load
Static load test above rated capacity on frame and foot bar, with no permanent deformation allowed.
Packing drop
Carton drop test on a sample of every batch, plus a wooden-box check for container loading.
Documents you receive
- Material certificate for timber and aluminium
- Inspection report for each gate (IQC / IPQC / FQA)
- Packing list with carton dimensions and gross weight
- Test report or declaration for CE-marked models
Anything missing from your market's requirements can usually be added — tell us the destination and we will confirm what is available for that model.
Want the inspection report for a specific model?
Tell us the model and destination market — we will send the documents that apply.
Request documents